Description
APUSBTO5: DUAL USB CHARGE & SYNC TO SUIT TOYOTA (23MM X 23MM)
Description
Aerpro APUSBTO5 Dual USB Charge & Sync has been designed specifically to suit various Toyota vehicles. It replaces the spare factory switch blanking plates in the vehicle dashboard that measure 23mm wide x 23mm high, providing seamless USB integration for your vehicle. Featuring two USB ports, one is designed for smartphone and device fast charging at 3A max and the other provides USB pass through sync for Audio, CarPlay & Android Auto when connected to the rear USB input on compatible aftermarket headunits. The USB charge port illuminates blue making it easy to find day and night. The clip-in design combined with the simple 3 wire plus USB connection, makes it quick and easy to install, providing a professional and discreet USB upgrade solution for the vehicle.
Important Information:
The AUDIO USB Port is pass through, it will only function when connected to the rear USB input of an aftermarket head unit.
Not recommended for aftermarket head units with a USB lead from rear of unit. Recommended for aftermarket head units with USB port on the rear of unit.
Specification
VEHICLE APPLICATION: VARIOUS TOYOTA VEHICLES
PANEL DIMENSIONS:
BODY: 23MM (W) X 23MM (H)
FACE: 23MM (W) X 23MM (H)
CONNECTION TYPE: DUAL USB
USB 1: FAST CHARGE 3.0A MAX
USB 2: PASS THROUGH (AUDIO AND SYNC)
MOUNTING TYPE: CLIP-IN
WIRING INSTALLATION:
12V+ ACCESSORY POWER: RED
EARTH: BLACK
ILLUMINATION: BLUE
USB CONNECTION: USB-A
NOTES:
The AUDIO USB Port is pass through, it will only function when connected to the rear USB input of an aftermarket head unit.
Not recommended for aftermarket head units with a USB lead from rear of unit. Recommended for aftermarket head units with USB port on the rear of unit.
Toyota C-HR 2019-
Toyota Camry 2017 -
Toyota Corolla 2018-2022
Toyota Fortuner 2020-
Toyota Granvia 2019-
Toyota HiAce 2019-
Toyota Kluger 2021-
Toyota Rav4 2019-
Toyota Yaris 2019-
Features
Suitable for Toyota vehicles with 23mm wide x 23mm high switch blanking plates
Replaces factory switch blanking plates in the dashboard
Vehicle specific OEM style design for discreet seamless USB integration
Dual USB ports, one fast charge and one sync pass through
Charge port supports up to 3 amps max and illuminates blue
Audio/sync port provides USB pass through for Audio, CarPlay & Android Auto when connected to compatible headunits
Ferrite choke on USB cable to reduce signal interference
Simple clip-in design makes it easy to install with no modifications required
3 wire installation; accessory power, illumination, earth/ground, plus USB connection
