Description
Description
The AXTOMI2 by Axxess Interface is an amplifier retention interface that allows the factory OEM amplifier to be retained in various Mitsubishi vehicles when upgrading to an aftermarket headunit. The interface retains audio balance and fade functions and provides handbrake, reverse trigger and speed sense outputs which are used when installing various aftermarket audio visual headunits. While the interface does include a harness specifically for various Mitsubishi Vehicles, it is not a complete plug and play solution, a number of wires need to be connected between the AXTOMI2 and the aftermarket headunit, it is recommended that wires are soldered for the best connection.
Note:
Amp Retention Interfaces vary between models, to find the correct part for your vehicle use the Aerpro Vehicle Selector.
The aftermarket headunit requires Front & Rear RCA outputs.
Specification
INTERFACE TYPE: OEM AMP RETENTION
INSTALLATION TYPE:
VEHICLE CONNECTION: VEHICLE SPECIFIC PLUG
AFTERMARKET HEADUNIT CONNECTION HARD WIRE (SOLDERING RECOMMENDED)
HEADUNIT COMPATIBILITY: MOST MAJOR BRANDS OF AFTERMARKET HEADUNITS WITH FRONT & REAR RCA OUTPUTS
AV HEADUNIT OUTPUTS:
REVERSE TRIGGER
HANDBRAKE
SPEED SENSE (VSS)
INCLUSIONS:
AXTOMI2 INTERFACE
AXTOMI2 HARNESS (WITH 18 PIN AND 20 PIN VEHICLE PLUGS)
14 PIN HARNESS WITH STRIPPED LEADS AND RCA JACKS
NOTE:
Amp Retention Interfaces vary between models, to find the correct part for your vehicle use the Aerpro Vehicle Selector.
The aftermarket headunit requires Front & Rear RCA outputs.
Mitsubishi Lancer 2007-2013 CJ
Mitsubishi Outlander 2007-2012 ZG, ZH
Mitsubishi Pajero 2006-2014 NS, NT, NW
Features
Retains the factory OEM amplifier in various Mitsubishi vehicles when installing an aftermarket headunit
Retains audio balance and fade functions and has an adjustable input gain
Provides handbrake, reverse trigger and speed sense outputs which are used when installing various aftermarket audio visual headunits
Fitted with a vehicle specific plug, no cutting of wires required in the vehicle
Hard wire installation between interface harness and aftermarket headunit harness is required
The aftermarket headunit requires front & rear RCA outputs
Micro USB updatable (cable not included)
