Description
CHLR10C: STEERING WHEEL CONTROL INTERFACE TO SUIT LANDROVER - FREELANDER 2 (FOR FIBRE OPTIC AMP SYSTEMS)
Description
The Aerpro CHLR10C Steering Wheel Control Interface (SWC) allows you to upgrade to an aftermarket headunit whilst maintaining use of your factory steering wheel controls. Engineered to suit Landrover Freelander 2 (2007-2012) models with MOST 25 Amplified Systems, the steering wheel control interface includes a harness that is fitted with a vehicle specific plug designed to connect directly into the existing wiring in the vehicle with ease, no cutting of the factory wiring harness in the vehicle is required. Installation of the aftermarket headunit is simplified even further when paired with the optional Aerpro APP9 Headunit Secondary ISO Harness & SWC Patch Lead, which connects between the aftermarket headunit and the Aerpro Steering Wheel Control Interface. This interface is CANBUS & Fibre Optic compatible and provides various outputs including Reverse Trigger, Park Brake, Speed Pulse, Illumination and Amp Remote. It has also been designed specifically to retain the MOST 25 OEM Amplified System in the vehicle.
Please Note:
Steering Wheel Control Interfaces vary between models, to find the correct part for your vehicle use the Aerpro Vehicle Selector.
A Steering Wheel Control Patch Lead is required to be used in conjunction with this part to enable Steering Wheel Controls to function (sold separately).
Aftermarket headunit must be SWC compatible and Steering Wheel Control Functions may vary from the OEM Functions.
To maintain MOST 25 OEM Amplified System, the aftermarket headunit requires RCA pre-outs.
Original Nav display will only show the LANDROVER logo.
Does not support date or time retention.
Remove the cable from the OEM display and replace it with the included MOST loop (orange wire) to reroute the signal
Specification
INTERFACE TYPE: CANBUS
PATCH LEAD TYPE: C
PHONE BUTTON COMPATIBILITY: YES
VOICE ASSISTANT BUTTON SUPPORT: NO
OUTPUTS:
REVERSE TRIGGER: YES (PURPLE/WHITE)
PARK BRAKE: YES (GREEN)
SPEED PULSE: YES (PINK)
ILLUMINATION: YES (ORANGE)
AMP REMOTE: YES (BLUE)
TELEPHONE MUTE: NO
OTHER RETENTION:
OEM AMPLIFIED SYSTEM: YES FIBRE OPTIC MOST 25
NOTES:
Aftermarket headunit must be SWC compatible.
SWC patch lead is also required to enable SWC (sold separately).
To maintain MOST 25 OEM Amplified System, the aftermarket headunit requires RCA pre-outs.
Original Nav display will only show the LANDROVER logo.
Does not support date or time retention.
Remove the cable from the OEM display and replace it with the included MOST loop (orange wire) to reroute the signal.
Landrover Freelander 2007-2012 (Freelander 2)
Features
Allows you to upgrade to an aftermarket headunit whilst maintaining use of your factory steering wheel controls
Increases driver safety by allowing you to keep your hands on the steering wheel and eyes on the road
Supports OEM Phone Button when connected to compatible aftermarket bluetooth headunits
Retains the MOST 25 OEM Amplified System in the vehicle (the aftermarket headunit requires RCA pre-outs)
CAN-BUS & Fibre Optic integration compatible, no additional modules required
Provides output feeds for reverse trigger, park brake, speed pulse, illumination and amp remote
Original Nav display will only show the LANDROVER logo and does not support date or time retention
Fitted with a vehicle specific plug, no cutting of wires required
Recommended to be installed with an Aerpro APP9 Headunit Secondary ISO Harness & SWC Patch Lead (sold separately)
Requires SWC patch lead to provide compatibility with the aftermarket headunit (sold separately)
