BlackVue Cellink-B Battery Expansion Pack
- Simply Plug Into Cellink-B
- No Need for further Hardwiring
- Doubles Dash Cam Running Times
- Up to ~68hrs Running Time
- High Quality Samsung Li-Ion Battery
- Authorised Australian Distributor
CELLINK-B EXPANSION PACK
The CELLINK-B EXPANSION PACK is also very high quality with exceeding reliability and performance, which when combined with the CELLINK-B system, offers the longest amount of recording time compared with any other model. Running times include ~40hrs+ for a DR650GW-2CH and ~68hrs+ for a single channel dash camera (DR650GW-1CH).
Note: This device can only be used when plugged into a current CELLINK-B model. Run times for dash cameras will double when the CELLINK-B and CELLINK-B EXPANSION PACK are both fully charged.
Charge times will double when you add the EXPANSION PACK onto the CELLINK-B as you're now charging double the capacity.
|Model Code||CELLINK B6 Expansion Pack * Must be combined with CELLINK-B to work.|
|Battery Capacity||76.8 Wh / ~6,000mAh 12.8V = ~12000mAh 12.8V when combined with CELLINK-B|
|Input Charging Power||12Volts - 17Volts ~ 7A|
|Charging Ampere Options||5 or 7 Ampere (A) (switch selectable)|
|Charging Time||1hour 20min (5A) / 1 hour (7A) = 2hour 40min (5A) / 2 hour (7A) with CELLINK-B|
|Usage time (discharging)||DR650GW-1CH = 68Hrs / DR650GW-2CH = 38Hrs / When Combined with CELLINK-B|
|Battery Type||Lithium-iron (LiFePo4) Samsung|
|LED||Built-in LED (Indicates Status / Charging or Full)|
|Dimensions||139mm x 125mm x 45mm (same size as CELLINK-B)|
|Operating Temperature||-10 ~ 70'C (Celsius)|
|Country of Origin||Korea (South)|
|Warranty||12 Months in Australia|
A demonstration of the Cellink B a 12V battery pack that will keep your dash-cam running when your engine isn't. Click Show More to view UK & AUS purchasing links. PLEASE READ THIS BOX IF YOU ARE PLANNING ON COMMENTING ABOUT THE FUSE TAP! 1) ebay UK http://goo.gl/Cus51B AUS: http://goo.gl/w2fKP6 2) Amazon UK http://amzn.to/1P2KKyW 3) HDigital Store (UK) http://www.car-dvr.co.uk/cellink_b/powerbank/cellink_b.html IMPORTANT INFORMATION - I have been informed that when a Fuse Tap is used - the fuse that was removed from the car should go in the socket nearest to the pins on the fuse tap and then the new fuse (the yellow one in this case) should be inserted in the socket on the fuse tap that is furthest from the pins. Apologies for any confusion caused. The Techmoan channel can be supported via Patreon at https://www.patreon.com/techmoan To subscribe to the Techmoan channel click here: http://www.youtube.com/user/Techmoan?sub_confirmation=1
Dashcam Batter...A demonstration of the Cellink B a 12V battery pack that will ...