Description
Kenwood KAC-M3004
General FeaturesRMS POWER Output 4Ω: 50W x 4
RMS POWER Output 2Ω: 75W x 4
RMS POWER Output Bridged: 150W x 2
Dimensions(WxHxD): 165mm x 45mm x 99mm
Singal Sensing Turn-on
Conformal Coating *1
*1: Do not install the unit in a spot exposed to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing.
MULTI-APPLICATION
Many of today’s powersports have very limited space to work in and tend to be a harsh environment for electronics because of the exposure to outdoor environments. KENWOOD’s compact performance amplifiers are small in size so they fit even the most limited installation areas. The amplifiers also use a conformal coated main PCB (printed circuit boards) which offer extra layers of protection to help prevent moisture or damp air from damaging the product.
Title Compact 4 Channel Digital Amplifier
Amplifier Type Class D
Maximum Power Output 600W
Specifications Signal to Noise Ratio 89dB (Reference: Rated Power into 4Ohms at 14.4V)
Frequency Response 20Hz-20kHz (+0dB, -1dB)
Input Impedance 10k ohm
Speaker Impedance 4Ω (2Ω to 8Ω allowable)
Bridged connection 4Ω to 8Ω allowable
Audio Section Low-Pass Filter Built in Variable Low-Pass Filter (50Hz-200Hz, -12dB/oct)
High-Pass Filter Built in Variable Low-Pass Filter (50Hz-200Hz, -12dB/oct)
Filter Selector 1 LPF-OFF-HPF
RCA Input Sensitivity 0.2 V - 5.0 V
Speaker Level Input Sensitivity 4.0 V - 12.0 V
Terminals Battery & Ground Screw Type Terminal Block (Ni) (M4)
Speaker Output MOLEX Connector with AWG16 200mm Wire
Line In RCA (Ni)
General Dimensions(WxHxD) 165mm x 45mm x 99mm
Weight(kg) 0.76kg
Operating Voltage 14.4V（11-16V allowable）
Current Consumption 22 A
Key Features
CEA-2006 Compliant
Class D
2 Ohms Load Capability
Speaker Level Input
Signal Sensing Turn-on
Power MOS-FET Switching Power Supply
Extruded Aluminum Heat Sink Design
Others
Triangle Indicator
