Description
Punch Single 12" 300 Watt Amplified Subwoofer
P300-12
If you need to quickly add bass to a system or want to alleviate the hassle of separate amplifiers and subwoofers, then the P300-12 is the right one for the job! The P300-12 features a Punch 12” subwoofer in a custom sealed enclosure and is powered by a mighty 300 Watt amplifier. The system is all-inclusive, so you only need to run power, ground and a signal from the source to get this baby moving. Features a durable exterior that resists scrapes and bumps while in the trunk or cargo area.
"Closed-loop" design ensures optimum performance between woofer, amplifier and enclosure
Built-in 0°/180° phase switch
Separate low level and speaker level inputs
Built-in adjustable bass boost EQ
Adjustable 12db/Octave low pass crossover
Detachable Power/Ground connector
Intelligent auto turn on/off function
Thermal and over/under voltage protection
High-efficiency, low current design
Remote bass level control included
Proprietary high output woofer
Constructed with 5/8" MDF
Large AWG input terminals
Covered with industrial heat activated vinyl
1 Year Warranty
Woofer Quantity1
Woofer SeriesProprietary
Woofer Size12"
Nominal Impedance (ea)—
Enclosure Material5/8" MDF (Medium Density Fiberboard)
Speaker Connectorn/a
Frequency Response20 Hz to 200 Hz
Integrated Amplifier300 Watts RMS
Tone ControlsGain & Bass Boost
Signal InputLow-Level: 1 RCA Pair
High-Level: Left/Right Summed Inputs
Power Input ConnectorQuick Disconnect
Replacement Part: 1040-57860-01
CoolingConvection
Remote ControlIncluded
Visual IndicatorsPower
Protect
Power Handling (Watts RMS)300 Watts RMS
Enclosure TypeAmplified
Dimensions
Box (H x W x D)
Wedge (H x W x D1 x D2)15 x 19.8 x D1 11 - D2 7 (in)
38.1 x 50.29 x D1 27.94 - D2 17.78 (cm)
Shipping Weight29.6 Lbs. (13.42 kg.)
Crossover ControlsVariable 50 Hz to 200 Hz
12dB/Octave Butterworth
Power Wire Gauge8 AWG
Heat Sink TypeExtruded Aluminum
Circuit Topology ClassClass-D
CEA-2031 CompliantCEA-2031 Guidelines
CEA-2006 Compliant
