Description
Punch 300 Watt 2-Channel Amplifier
P300X2
The Punch P300X2 is a 2-channel stereo amplifier capable of producing 150 Watts into each channel at 2-Ohms. The P300X2 amplifier is great with full-range or component systems and can be bridged for use with smaller subwoofers.
The P300X2 is a solid choice if you're looking to drive a pair of coaxial speakers, component speakers, or a single subwoofer. The amplifier can also be run in stereo/mono mode simultaneously when using passive crossovers (not supplied) on all speakers. With proven PUNCH technology, the P300X2 delivers real Rockford Fosgate power from a small design and is flexible to accommodate any moderately sized system.
High level input capable with Auto Turn-On circuit
RCA pass-thru outputs
Features C.L.E.A.N. Set-up
Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
12dB/octave Butterworth crossover
On-board Punch EQ with +18dB boost @ 45Hz
Muted turn on
Stealth top mounted control panel
Cast aluminum heatsink
Short circuit protection
Over current protection
1 Year Warranty
CEA-2006 CompliantCEA-2006 GuidelinesCEA-2006 Power Rating
100W x 2 @ 4Ω
≤1.0% THD+N
Number of Channels2
Total Power
(Sum of Rated Power)300 Watts
Rated Power
(RMS Continuous Power)100 Watts x 2 @ 4-Ohm
150 Watts x 2 @ 2-Ohm
300 Watts x 1 @ 4-Ohm Bridged
Dynamic Power
(PVC/PowerCube®)120 Watts x 2 @ 4-Ohms 0° Res
203 Watts x 2 @ 2-Ohms 0° Res
BridgeableYes
Frequency Response20Hz-20kHz
Input Sensitivity150 mV - 12 V
Circuit Topology ClassClass A/B
Efficiency (average)69% @ 4-Ohm
Total Harmonic Distortion (THD+Noise)4-Ohm: <1.0%
2-Ohm: <1.0%
Signal InputHi/Low Level: 1 RCA Pair
Signal OutputLow Level: 1 RCA Pair
Tone Controls0dB to +14dB @ 12.5kHz
0dB to +18dB @ 45Hz
Crossover ControlsHigh-Pass: 50Hz - 250Hz @ 12dB/Octave Butterworth
Low-Pass: 50Hz - 250Hz @ 12dB/Octave Butterworth
All-Pass: Yes
Remote ControlsOptional Punch Level Control (PLC2) Ready
Visual IndicatorsPower/Protect/Thermal LED
Input Clip LED3
Output Clip LED1,2,3
LED Color Legend:
1BLUE: <0.5% THD
2VIOLET: 1% THD
3RED: 10%+ THD
Power Wire Gauge8 AWG to 4 AWG
Power Input ConnectorCaptive C-Clamp
Speaker Wire Gauge8 AWG to 18 AWG
Speaker Output ConnectorCaptive C-Clamp
CoolingConvection
Heatsink
Operating Voltage9 - 16 VDC
Recommended Fuse
(not included)50 A
Average Current Draw (13.8V Music)23 A
Max. Current Draw (13.8V Sinewave)45 A
Suggested Alternator75 A
Dimensional Diagram
Dimensions (H x W x D)2.38 x 7.76 x 9.86 (in)
6.05 x 19.71 x 25.04 (cm)
