Description
With its super efficient Class-bd circuit topology, the PM1000X1bd assures maximum BOOM for your buck! Due to its dedicated low frequency response, this amplifier is optimized for mid-bass speakers or subwoofers only. No need to worry because its 1-ohm capability will drive a pair of 4-ohm DVC subwoofers or quad-configuration of 2-ohm DVC subwoofers with ease.
High level input capable with Auto Turn-On circuit
Features C.L.E.A.N. Set-up
Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
12dB/octave Butterworth crossover
RCA pass-thru outputs
On-board Punch EQ with +18dB boost @ 45Hz
Muted turn on
Stealth top mounted control panel
Cast aluminum heatsink
Short circuit protection
Over current protection
Infrasonic filter
Marine grade two part epoxy coating on circuit boards
Marine grade stainless steel hardware
2 Year Warranty
Recommended Fuse
(not included)
140 A
Total Harmonic Distortion (THD+Noise)
4-Ohm: <1.0%
2-Ohm: <1.0%
1-Ohm: <1.0%
Efficiency (average)
86% @ 4-Ohm
Dynamic Power
(PVC/PowerCube®)
491 Watts x 1 @ 4-Ohms
874 Watts x 1 @ 2-Ohms
1,430 Watts x 1 @ 1-Ohm
Shipping Weight
12.9 Lbs. (5.85 Kg.)
CEA-2006 Compliant
CEA-2006 Power Rating
300W x 1 @ 4Ω
≤1.0% THD+N
Suggested Alternator
100 A
Operating Voltage
9 - 16 VDC
Max. Current Draw (13.8V Sinewave)
130 A
Average Current Draw (13.8V Music)
65 A
Crossover Controls
Low-Pass (LP): 50-250Hz @ 12dB/octave Butterworth
Infrasonic Filter (IF): 28Hz @ 12dB/Octave Butterworth
All-Pass: No
Input Sensitivity
150 mV - 12 V
Number of Channels
1
Rated Power
(RMS Continuous Power)
300 Watts x 1 @ 4-Ohm
500 Watts x 1 @ 2-Ohm
1000 Watts x 1 @ 1-Ohm
Total Power
(Sum of Rated Power)
1000 Watts
Bridgeable
No
Tone Controls
Punch EQ2 Bass: 0dB to +18dB @ 45Hz
Signal Input
Hi/Low level: 1 RCA pair
Signal Output
Hi/Low level: 1 RCA pair
Power Input Connector
Captive C-Clamp
Power Wire Gauge
4 AWG
Speaker Output Connector
Captive C-Clamp
Speaker Wire Gauge
8 AWG to 18 AWG
Heat Sink Type
Cast aluminum
Cooling
Convection
Remote Controls
Optional Punch Level Control (PLC2) Ready
Visual Indicators
Power/Protect/Thermal LED
Input Clip LED3
Output Clip LED1,2,3
LED Color Legend:
1BLUE: <0.5% THD
2VIOLET: 1% THD
3RED: 10%+ THD
Circuit Topology Class
Class BD
Frequency Response
20Hz to 250Hz +/- 1.0dB
Dimensions (H x W x D)
2.38 x 7.76 x 13.28 (in)
6.05 x 19.71 x 33.73 (cm)
Extra Information
Warranty Information
2 Years
