Rockford Fosgate PM300X2 Punch Marine 300 Watt 2-Channel Amplifier

The PM300X2 is a solid choice if you're looking to drive a pair of coaxial speakers, component speakers, or a single subwoofer. The amplifier can also be run in stereo/mono mode simultaneously when using passive crossovers (not supplied) on all speakers. With proven PUNCH technology, the PM300X2 delivers real Rockford Fosgate power from a small design and is flexible to accommodate any moderately sized system.

High level input capable with Auto Turn-On circuit
RCA pass-thru outputs
Features C.L.E.A.N. Set-up
Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
12dB/octave Butterworth crossover
On-board Punch EQ with +18dB boost @ 45Hz
Muted turn on
Stealth top mounted control panel
Cast aluminum heatsink
Short circuit protection
Over current protection
Marine grade two part epoxy coating on circuit boards
Marine grade stainless steel hardware
2 Year Warranty
Recommended Fuse
(not included)
50 A
Operating Voltage
9 - 16 VDC
Suggested Alternator
75 A
Input Sensitivity
150 mV - 12 V
Bridgeable
Yes
CEA-2006 Compliant
CEA-2006 Power Rating
100W x 2 @ 4Ω
≤1.0% THD+N
Crossover Controls
High-Pass: 50Hz - 250Hz @ 12dB/Octave Butterworth
Low-Pass: 50Hz - 250Hz @ 12dB/Octave Butterworth
All-Pass: Yes
Signal Input
Hi/Low Level: 1 RCA Pair
Signal Output
Low Level: 1 RCA Pair
Power Input Connector
Captive C-Clamp
Speaker Output Connector
Captive C-Clamp
Speaker Wire Gauge
8 AWG to 18 AWG
Cooling
Convection
Remote Controls
Optional Punch Level Control (PLC2) Ready
Dimensions (H x W x D)
2.38 x 7.76 x 9.86 (in)
6.05 x 19.71 x 25.04 (cm)
Dynamic Power
(PVC/PowerCube®)
120 Watts x 2 @ 4-Ohms 0° Res
203 Watts x 2 @ 2-Ohms 0° Res
Total Harmonic Distortion (THD+Noise)
4-Ohm: <1.0%
2-Ohm: <1.0%
Max. Current Draw (13.8V Sinewave)
45 A
Rated Power
(RMS Continuous Power)
100 Watts x 2 @ 4-Ohm
150 Watts x 2 @ 2-Ohm
300 Watts x 1 @ 4-Ohm Bridged
Number of Channels
2
Total Power
(Sum of Rated Power)
300 Watts
Tone Controls
0dB to +14dB @ 12.5kHz
0dB to +18dB @ 45Hz
Power Wire Gauge
8 AWG to 4 AWG
Heat Sink Type
Die Cast Aluminum
Visual Indicators
Power/Protect/Thermal LED
Input Clip LED3
Output Clip LED1,2,3

LED Color Legend:
1BLUE: <0.5% THD
2VIOLET: 1% THD
3RED: 10%+ THD
Circuit Topology Class
Class A/B
Frequency Response
20Hz-20kHz
Shipping Weight
9.5 Lbs. (4.3 Kg.)
Efficiency (average)
69% @ 4-Ohm
Dimensional Diagram

Average Current Draw (13.8V Music)
23 A