- CAR AUDIO
- 12 Inch Subwoofer
- JL Audio CP112-W0v3 Single 12" 12W0v3-4 Loaded Ported Enclosure
JL Audio CP112-W0v3 Single 12" 12W0v3-4 Loaded Ported Enclosure with Gray Carpet Finish
CP112-W0v3 Enclosed Subwoofer System with Single 12W0v3-4 Subwoofer Driver, Dark Gray Carpet (300 W, 4 Ω) - Ported Enclosure
This powerful slot-ported BassWedge™ subwoofer system delivers awesome output at an unsurpassed value.
The slot-port runs along the bottom of the enclosure and fires on the same plane as the woofer to produce excellent extension and response smoothness. The port mouth is flared to minimize air-flow noises.
The ultra-versatile BassWedge™ shape has extended sides so that it can be placed with the woofer firing out or straight down, off the floor of the vehicle. The shape works equally well in forward or rear-firing installations. This gives you plenty of options for tweaking the loading of the enclosure into your vehicle.
This subwoofer system is shipped wired, loaded and ready to connect via a push-button terminal.
Finish: Dark gray, high-grade automotive carpet with "JL AUDIO" embroidery on the top edge and "Slot-Ported BassWedge™" embroidered on the port mouth.
Recommended amplifier power: 75 - 300W
Nominal Impedance: 4 Ω
• 12" Single 4 Ohm W0v3 Series Subwoofer
• Power Handling:
o Peak: 600 watts
o RMS: 300 watts
• Impedance: 4 Ohm
• Mineral-filled, polypropylene cone woofer for excellent durability
• Large roll surround for generous amounts of excursion
• Elevated frame cooling brings air directly to the voice coil
• Designed for compact sealed enclosures or medium-sized ported enclosures
• Large excursion for louder bass and less distortion
• DMA Optimized motor system reduces distortion and tight, clean bass
• Lead wire woven into spider for added strength
• Metallic silver frame finish
• 2" High temperature voice coil
• Sensitivity: 85.64 dB
• Xmax: 11.4 mm
• 5-1/16" Magnet diameter
• Mounting Depth: 5-7/16"
• Cutout Diameter: 11-1/16"
• 1-year SonicElectronix.com warranty
• 12" Slot Ported MDF Subwoofer Enclosure
• Loaded with single 12W0v3 12" subwoofer
• Designed for forward, rear or down-firing installation
• Top-quality MDF construction
• Durable dark gray carpet finish
• Five-Way binding post connectors
• Embroidered JL Audio logo
• Embroidered "Slot-Ported BassWedge" logo on port mouth
• 4 Ohm final impedance
• Dimensions: 15-3/4"TD x 20-5/16"BD x 16-5/16"W x 15-3/16"H
Customers also viewed