Description
The PM1000X5 1,000 Watt full-range 5-channel is the one-and-only amplifier you will need to run your entire system. Run dash speakers off the front channels, run back speakers off the rear channels and run subwoofer(s) off the 5th channel! Known world-wide for brute power, this amplifier offers a higher level of efficiency along with a tri-stage protection that covers thermal, over-current and short circuits.
High level input capable with Auto Turn-On circuit
Features C.L.E.A.N. Set-up
Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
12dB/octave Butterworth crossover
On-board Punch EQ with +18dB boost @ 45Hz
Muted turn on
Stealth top mounted control panel
Cast aluminum heatsink
Short circuit protection
Over current protection
Infrasonic filter
2/4 channel input switch
Marine grade two part epoxy coating on circuit boards
Marine grade stainless steel hardware
2 Year Warranty
Input Sensitivity
150 mV - 12 V
Operating Voltage
9 - 16 VDC
Number of Channels
5
CEA-2006 Compliant
CEA-2006 Power Rating
75Wx4 + 150Wx1 @ 4Ω
≤1.0% THD+N
Tone Controls
Sub:
0dB to +18dB @ 45Hz
Signal Input
Input Switch: Hi/Low level input
Input Switch: 2/4 channel input
Hi/Low Level: 3 RCA Pair
Sub: front/sub input switch
Signal Output
-
Power Input Connector
Block
Power Wire Gauge
4 AWG
Speaker Output Connector
Block
Speaker Wire Gauge
12 AWG
Visual Indicators
Power/Protect/Thermal LED
Input Clip LED3
Output Clip LED1,2,3
LED Color Legend:
1BLUE: <0.5% THD
2VIOLET: 1% THD
3RED: 10%+ THD
Dimensions (H x W x D)
2.38 x 7.76 x 15.03 (in)
6.05 x 19.71 x 38.18 (cm)
Total Harmonic Distortion (THD+Noise)
<1.0%
Average Current Draw (13.8V Music)
75 A
Max. Current Draw (13.8V Sinewave)
150 A
Recommended Fuse
(not included)
150 A
Suggested Alternator
100 A
Rated Power
(RMS Continuous Power)
75 Watts x 4 +
150 Watts x 1 @ 4-Ohm
125 Watts x 4 +
300 Watts x 1 @ 2-Ohm
N/A +
500 Watts @ 1-Ohm
Total Power
(Sum of Rated Power)
1000 Watts
Bridgeable
Yes (front/rear channels)
Crossover Controls
Front: 50Hz - 250Hz High-Pass @ 12dB/Octave
Rear: 50Hz - 250Hz High-Pass @ 12dB/Octave
Sub: 50Hz - 250Hz Low-Pass
Sub: 28Hz infrasonic filter @ 12dB/Octave
Heat Sink Type
Cast
Cooling
Convection
Remote Controls
Optional Punch Level Control (PLC2) Ready
Circuit Topology Class
Class A/B + Class BD (Sub)
Frequency Response
Front/Rear: 20Hz - 20kHz +/-3dB
Sub: 20Hz - 500Hz +/-3dB
Shipping Weight
15.3 Lbs. (6.93 Kg.)
Dynamic Power
(PVC/PowerCube®)
115 Watts x 4 +
299 Watts x 1 @ 4-Ohms 0° Res
190 Watts x 4 +
540 Watts x 1 @ 2-Ohms 0° Res
N/A +
863 Watts x 1 @ 1-Ohm 0° Res
Efficiency (average)
Front/Rear: 66% @ 4-Ohm
Sub Channel: 80% @ 4-Ohm
Extra Information
Warranty Information
2 Years
