Description
JL Audio BassWedge Enclosed Car Subwoofer, Single 12" W0v3 (0100316200)
The BassWedge is a loaded subwoofer: a 12" W0v3 driver already mounted in a slot-ported enclosure tuned for it. There’s no box to design or build, and the wedge shape lets you mount it firing out or straight down, depending on where it sits in the vehicle.
Key features:
- 12" JL Audio W0v3 subwoofer with a mineral-filled polypropylene cone that resists flexing under hard use
- Long-excursion design with a 2" voice coil, built to reach deep notes with low distortion
- DMA-Optimised motor, suspension and cone design for long, linear excursion
- Elevated Frame Cooling™ sends air across the top plate of the voice coil to help with power handling and reliability
- Durable foam surround
- Slot-ported enclosure, with the port mouth at the front of the box
- Extended sides so the box can sit with the woofer firing out or firing straight down off the floor of the vehicle
- Dark grey automotive carpet finish, embroidered with “JL AUDIO” on the top edge and “Slot-Ported BassWedge” on the port mouth
- Push-button speaker terminal
Who it’s for:
Owners who want a proper subwoofer upgrade without building a custom enclosure. The wedge shape suits forward- or rear-firing installs, so it’s a good option when floor or boot space is awkward.
Fitment & installation notes:
- Height: 15.18" (386mm)
- Width: 16.31" (414mm)
- Depth: 15.75" (400mm) at the top and 20.3" (516mm) at the base
- Weight: 33.1 lbs (15kg)
- Can be mounted with the woofer firing out or straight down
- Works in forward- or rear-firing installations
- Measure your available space against the base depth before ordering, as the box is deeper at the bottom than the top
Power and specifications:
- Continuous power handling: 300W RMS
- Recommended amplifier power: 75–300W RMS
- Nominal impedance: [2Ω or 4Ω, confirm before publishing]
- Driver: 12" W0v3, mineral-filled polypropylene cone
- Enclosure type: slot-ported
- Speaker connection: push-button terminal