Rockford Fosgate Punch P1 3.5" 3-Way Coaxial Speakers (P1V2-3)

Rockford Fosgate Punch P1 3.5" 3-Way Coaxial Speakers (P1V2-3)

The Punch P1V2-3 is a full 3-way coaxial in a 3.5" size, aimed at the small factory speaker locations that most aftermarket coaxials don’t fit. It ships with a set of twist-lock adaptors for different vehicle types, so a lot of installs are drop-in rather than a cutting and fabrication job.

Key features:

• 3-way design with a 3.5" midrange, a 3/4" inverted dome tweeter and a 3/8" co-witnessed convex piezo tweeter for extended high-frequency detail
• VAST 2.0™ cone technology gives 25% more cone area, for deeper bass and more output from a small driver
• Tru-Sight™ tweeter alignment keeps high frequencies precise and on-axis
• Rated at 75W RMS / 150W peak at 4Ω, with a frequency response down to 98Hz
• Carbon fibre reinforced basket, Santoprene™ surround and Nomex® spider built for sustained high output
• Four sets of twist-lock adaptors in the box: 2-tab universal, 3-tab for Tesla and Mercedes-Benz, and both 2-tab and 3-tab for Jeep
• F.L.W.R. (Factory Location Woofer Ring) and mounting flanges help the speaker line up with factory mounting points
• Two 33µF bass-blocker caps included to protect the midrange from low-frequency content

Who it’s for:
Owners and installers upgrading small factory speaker locations (dash, door and pillar positions) in vehicles that use 3.5" speakers, particularly Tesla, Mercedes-Benz and Jeep models covered by the included adaptors, who want proper 3-way sound instead of a basic replacement.

Fitment & installation notes:

• Cutout diameter: 2.87" (73mm)
• Front-loading depth (twist-lock adaptor): 1.7" (43.3mm)
• Rear-loading depth (twist-lock adaptor): 1.48" (37.7mm)
• Front side clearance: 0.53" (13.4mm)
• No removable motor cover
• No grille or trim ring included, so check whether your install location needs one
• Cutout template included for marking the mounting hole accurately

Specifications:

• Nominal impedance: 4Ω
• Power handling: 75W RMS / 150W peak
• Frequency response: 98Hz–25kHz
• Sensitivity: 82dB (1W/1M) / 85dB (2.83V/1M)
• Voice coil diameter: 1" (25.4mm)
• Tweeter crossover: high-pass at 9kHz, 6dB/octave
• Midrange bass blocker: 1,200Hz, 6dB/octave (33µF)
• Fs: 130Hz

In the box & warranty:

• 2 x 3.5" 4Ω 3-way coaxial speakers
• Twist-lock adaptors: 2 x 2-tab universal, 2 x 3-tab Tesla/Mercedes-Benz, 2 x 3-tab Jeep, 2 x 2-tab Jeep
• 2 x 33µF non-polarised bass-blocker caps
• Cutout template
• 6 x self-tapping Phillips screws (#8 x 32mm)
• 2 x 18 AWG red/black speaker wire (205mm)
• 18 AWG female crimp spade connectors (3 x negative .187", 3 x positive .250") and 6 x crimp butt connectors