Rockford Fosgate Punch P2 6"x8" 2-Way High-Output Convertible Speakers (P2V268HO)

Rockford Fosgate Punch P2 6"x8" 2-Way High-Output Convertible Speakers (P2V268HO)

The Punch P2 6"x8" High-Output is a 2Ω convertible speaker, so you can fit it as a coaxial or split the tweeters into a component setup. It’s made for the oval 6"x8" door and dash locations, and it’s designed to be run from an amplifier that can drive a 2Ω load.

Key features:

• 2Ω design, with 2Ω woofers and 2Ω tweeters in the box, for installs where the amplifier is stable at 2Ω
• Convertible: leave the tweeter on the woofer for a coaxial install, or lock it into a mounting cup and move it to a better position in the door, dash or pillar
• Interchangeable Locking Mechanism (I.L.M.) lets you lock and unlock the tweeter from the wired mounting cup. A removal tool is included
• 3/4" inverted dome tweeter with a 9kHz high-pass crossover, supplied with an HO passive crossover network
• VAST 2.0™ cone technology gives 25% more cone area for deeper bass and stronger output
• 75W RMS / 150W peak power handling, with frequency response from 45Hz to 25kHz
• Reinforced polymer basket, Santoprene™ surround and Nomex® spider built to handle sustained output
• Removable motor cover lowers the mounting depth when there’s limited space behind the panel
• External crossover has a 0dB or -3dB tweeter attenuation setting, so you can adjust the highs to suit your cabin

Who it’s for:
Owners and installers upgrading 6"x8" speaker locations who are running an amplifier that’s stable at 2Ω and want a speaker that can be set up as a coaxial or component. If you’re running the factory head unit’s built-in amplifier, check that it can handle a 2Ω load before ordering.

Fitment & installation notes:

• Cutout size: 7.19" x 5.18" (182.5mm x 131.5mm)
• Mounting depth with motor cover: 2.61" (66.4mm)
• Minimum mounting depth with motor cover removed: 2.37" (60.3mm)
• Front side clearance: 0.43" (11mm)
• Flush-mount and surface-mount tweeter cups both included
• Four 18" crossover wiring extensions included so the crossovers can be mounted away from the speaker
• Check your existing speaker size and cutout before ordering
• No grille or trim ring included, so check whether your install location needs one
• Cutout template included for marking the mounting hole

Specifications:

• Nominal impedance: 2Ω
• Power handling: 75W RMS / 150W peak
• Frequency response: 45Hz–25kHz
• Sensitivity: 89dB (1W/1M) / 92dB (2.83V/1M)
• Voice coil diameter: 1.25" (32.5mm)
• Tweeter crossover, internal: high-pass at 9kHz, 6dB/octave
• Tweeter crossover, external: high-pass at 9kHz, 12dB/octave, with 0dB or -3dB attenuation
• Fs: 60Hz

In the box & warranty:

• 2 x 6"x8" 2Ω speakers and 2 x 3/4" 2Ω tweeters
• 2 x HO passive crossover networks
• 2 x flush-mount tweeter cups and 2 x surface-mount tweeter cups
• 2 x woofer phase plugs
• Tweeter removal tool
• Cutout template
• Mounting screws: 8 x #8 x 32mm (speaker), 4 x #4 x 16mm (tweeter), 4 x #8 x 20mm (crossover)
• 4 x 18" crossover wiring extensions and 2 x 18 AWG red/black speaker wire (205mm)
• 18 AWG female crimp spade connectors (3 x negative .187", 3 x positive .250"), 4 x crimp butt connectors and 6 x zip ties