Rockford Fosgate Punch P2 6"x9" 2-Way High-Output Convertible Speakers (P2V269HO)

Rockford Fosgate Punch P2 6"x9" 2-Way High-Output Convertible Speakers (P2V269HO)

The Punch P2 6"x9" High-Output is a 2Ω convertible speaker you can fit as a coaxial or split into a component setup. It’s for the oval 6"x9" locations in rear decks and doors, and it’s designed to run from an amplifier that’s stable at 2Ω. Everything you need for either install is in the box.

Key features:

• 2Ω design, with 2Ω woofers and 2Ω tweeters in the box, for systems where the amplifier handles a 2Ω load
• Convertible: leave the tweeter on the woofer for a coaxial install, or lock it into a mounting cup and place it higher in the door, dash or pillar
• Interchangeable Locking Mechanism (I.L.M.) lets you lock and unlock the tweeter from the wired mounting cup. A removal tool is included
• 3/4" inverted dome tweeter with a 9kHz high-pass crossover, supplied with an HO passive crossover network
• VAST 2.0™ cone technology gives 25% more cone area for deeper bass and stronger output
• 75W RMS / 150W peak power handling, with frequency response from 45Hz to 25kHz
• 90dB sensitivity (1W/1M)
• Reinforced polymer basket, Santoprene™ surround and Nomex® spider built to handle sustained output
• Removable motor cover reduces the mounting depth from 3.13" to 2.55" when space is tight
• External crossover has a 0dB or -3dB tweeter attenuation setting, so you can adjust the highs to suit your cabin

Who it’s for:
Owners and installers upgrading 6"x9" speaker locations who are running an amplifier that’s stable at 2Ω and want the choice of coaxial or component. If you’re running a factory or head unit amplifier, check that it can handle a 2Ω load before ordering. If it can’t, the 4Ω P2V269 is the better fit.

Fitment & installation notes:

• Cutout size: 8.41" x 5.71" (213.5mm x 145mm)
• Mounting depth with motor cover: 3.13" (79.4mm)
• Minimum mounting depth with motor cover removed: 2.55" (64.7mm)
• Front side clearance: 0.42" (10.6mm)
• Flush-mount and surface-mount tweeter cups both included
• Four 18" crossover wiring extensions included so the crossovers can be mounted away from the speaker
• Check your existing speaker size and cutout before ordering
• No grille or trim ring included, so check whether your install location needs one
• Cutout template included for marking the mounting hole

Specifications:

• Nominal impedance: 2Ω
• Power handling: 75W RMS / 150W peak
• Frequency response: 45Hz–25kHz
• Sensitivity: 90dB (1W/1M) / 93dB (2.83V/1M)
• Voice coil diameter: 1.25" (32.5mm)
• Tweeter crossover, internal: high-pass at 9kHz, 6dB/octave
• Tweeter crossover, external: high-pass at 9kHz, 12dB/octave, with 0dB or -3dB attenuation
• Fs: 60Hz

In the box & warranty:

• 2 x 6"x9" 2Ω speakers and 2 x 3/4" 2Ω tweeters
• 2 x HO passive crossover networks
• 2 x flush-mount tweeter cups and 2 x surface-mount tweeter cups
• 2 x woofer phase plugs
• Tweeter removal tool
• Cutout template
• Mounting screws: 8 x #8 x 32mm (speaker), 4 x #4 x 16mm (tweeter), 4 x #8 x 20mm (crossover)
• 4 x 18" crossover wiring extensions and 2 x 18 AWG red/black speaker wire (205mm)
• 18 AWG female crimp spade connectors (3 x negative .187", 3 x positive .250"), 4 x crimp butt connectors and 6 x zip ties